MSP430F5529 Mixed-Signal MCU

Product Highlights > MSP430F5529 Mixed-Signal MCU

            MSP430F5529 Mixed-Signal MCU
                    Texas Instruments' MSP430F5529 16-bit ultra-low-power MCU consists of several devices featuring peripheral sets targeted for a variety of applications
    

Image of Texas Instruments' MSP430F5529 Mixed-Signal MCU Texas Instruments' MSP430F5529 mixed-signal microcontroller (MCU) is part of the ultra-low-power MSP430 MCU family. This TI MCU is configured with integrated USB and PHY supporting USB 2.0, four 16-bit timers, a high-performance 12-bit ADC, and a real-time clock module with alarm capabilities. The TI MSP430F5529 has 63 I/O pins, compared to 47 I/O pins on the MSP430F5528.

Typical applications include analog and digital sensor systems, data loggers, and other applications requiring connectivity to various USB hosts.

Features
Low supply voltage range: 3.6 V down to 1.8 V Ultra-low power consumption Active mode (AM): All system clocks active: 290 µA/MHz at 8 MHz, 3.0 V, Flash program execution (typ) 150 µA/MHz at 8 MHz, 3.0 V, RAM program execution (typ) Standby mode (LPM3): Real-time clock (RTC) with crystal, watchdog, and supply supervisor operational, full RAM retention, fast wake up: 1.9 µA at 2.2 V, 2.1 µA at 3.0 V (typ) Low-power oscillator (VLO), general-purpose counter, watchdog, and supply supervisor operational, full RAM retention, fast wake up: 1.4 µA at 3.0 V (typ) Off mode (LPM4): Full RAM retention, supply supervisor operational, fast wake up: 1.1 µA at 3.0 V (typ) Shutdown mode (LPM4.5): 0.18 µA at 3.0 V (typ) Flexible power management system Fully integrated LDO with programmable regulated core supply voltage Supply voltage supervision, monitoring, and brownout Unified clock system FLL control loop for frequency stabilization Low-power low-frequency internal clock source (VLO) Low-frequency trimmed internal reference source (REFO) 32 kHz watch crystals (XT1)		High-frequency crystals up to 32 MHz (XT2) Wake up from standby mode in 3.5 µs (typ) 16-bit RISC architecture, extended memory, up to 25 MHz system clock 16-bit timer TA0, timer_A with five capture/compare registers 16-bit timer TA1, timer_A with three capture/compare registers 16-bit timer TA2, timer_A with three capture/compare registers 16-bit timer TB0, timer_B with seven capture/compare shadow registers Two universal serial communication interfaces USCI_A0 and USCI_A1 each support: Enhanced UART supports automatic baud-rate detection IrDA encoder and decoder Synchronous SPI USCI_B0 and USCI_B1 each support: I²C Synchronous SPI Full-speed universal serial bus (USB) Integrated USB-PHY Integrated 3.3 V and 1.8 V USB power system Integrated USB-PLL Eight input and eight output endpoints 12-bit analog-to-digital converter (ADC) (MSP430F552x only) with internal reference, sample-and-hold, and autoscan feature Comparator Hardware multiplier supports 32-bit operations Serial onboard programming, no external programming voltage needed Three-channel internal DMA Basic timer with RTC feature

MSP430F5529 Mixed-Signal MCU

	Afbeelding	Onderdeelnr. fabrikant	Beschrijving	Available Quantity	Prijs
		MSP430F5529IPN	IC MCU 16BIT 128KB FLASH 80LQFP	611 - Immediate	$10.03	Details weergeven
		MSP430F5529IPNR	IC MCU 16BIT 128KB FLASH 80LQFP	2457 - Immediate	$8.50	Details weergeven

Evaluation Modules and Dev Boards

Onderdeelnr. fabrikant	Beschrijving	Available Quantity	Prijs	Details weergeven
BQ76PL536EVM-3	EVAL BOARD BQ76PL536 MSP430F5529	1 - Immediate	$413.54	Details weergeven
EV2400	EVAL BOARD FOR MSP430F5529	257 - Immediate	$206.25	Details weergeven
MSP-EXP430F5529LP	LAUNCHPAD MSP430F5529 EVAL BRD	904 - Immediate	$13.47	Details weergeven
MSP-EXP430F5529	EXPERIMENTER MSP430F5529 EVAL BD	0 - Immediate	$188.93	Details weergeven

Published: 2013-06-17

Related Product Highlight

EPD Extension Kit Gen 2 Pervasive Displays EPD Extension Kit Gen 2 is designed for interfacing TI LaunchPad development boards with any of its e-paper displays.

BQ25887 Battery Charger with Cell Balancing Texas Instruments' BQ25887 battery charger can be configured as an I2C controlled device and 2s battery charger for Li-Ion and Li-polymer batteries.

bq25882 2 A Boost-Mode Battery Charger Texas Instruments' bq25882 boost-mode battery charger is ideal for Li-Ion and Li-polymer batteries used in portable devices such as smartphones.

Related Product Training Modules

Communication Solutions for Industrial Automation Learn about communication interfaces on MSP430 MCUs for factory automation, their benefits, and solutions that will reduce development time.

LaunchPad Temboo Integration A brief overview of the Temboo service and its support for connected Texas Instruments LaunchPad hardware.

Introduction to Real-Time Operating Systems and SYS/BIOS Discuss the differenece between a Standard Operating and Real Time Operating Systems as well as an overview of SYS/BIOS and Static Configuration.

MSP430F5529 Mixed-Signal MCU