CCG3PA: USB Type-C 45W Car Charger

Summary

The CCG3PA Car Charger Reference Design Board is a receptacle based USB-C Charger with USB PD 3.0 support. It is designed to work with standard Car Lighter Attachment (CLA). The design works with any DC input between 2.7V to 30V.

The EZ-PD™ CCG3PA Evaluation Kit (CY4532) is available at DigiKey along with CCG3PA silicon. CY4532 can be used as a vehicle for CCG3PA-based USB Type-C Power Adapter (PA), USB Type-C mobile charger and USB Type-C Power Bank (PB) applications. The below reference design is available with full hardware design files (schematic, layout, etc.) and firmware for customers to reduce design cycle.

Reference design features:

Supports USB PD 3.0 and QC3.0
Fixed PDO: 5V/3A, 9V/3A, 15V/3A,20V/2.25A,
PPS: 3V-11V/3A, 3V - 16V/3A
Low BOM cost with SC8815 needs 2 external MOSFETs
CCG3PA controls SC8815 via I2C interface, including voltage and current limit

(Infineon Technologies bought Cypress Semi)

Specifications

Manufacturer	Infineon Technologies
Category	Power Management
Sub-Category	Battery Chargers
Eval Board	Board not Stocked
Cell Type	Lithium Ion, Li-Ion Lithium Polymer, Li-Pol
Configuration	1 Cell 1 Cell (Li-Ion) USB Dedicated Charging Port
Voltage In	2.7 ~ 30 V
Voltage Out	3 ~ 11V 3 ~ 16V 5 V 9 V 15 V 20 V
Current Out	2.25 A 3 A
Features	Current Limit (Adj. or Fixed) I²C Interface Over Current Protection Over Voltage Protection USB Type-C PD 3.0 USB Type-C QC 3.0
Quiescent Current [Typical]	- Not Given
Sleep Mode Current [Typical]	- Not Given
Component Count + Extras	29 + 10
Application / Target Market	Automotive
Design Author	Infineon Technologies
Main I.C. Base Part	CCG3PA CYPD317
Quiescent Current [Maximum]	- Not Given
Sleep Mode Current [Maximum]	- Not Given
Date Created By Author
Date Added To Library	2018-04