Alternative Energy
Key Components for Wind Turbines
- Main Inverters > 250 kW
- Power Filters
- Pitch Controls
Main Inverters > 250 kW
Resistors
Power Resistors Cooled by Auxiliary Heatsink (Not Supplied) Thick Film Technology
- System without external radiation
- High power / volume ratio
- Non-inductive
Resistors
Charging Resistor Hybrid Wirewound Technology
- Wirewould resistor material embedded in ceramics
- Highest pulse power absobtion
- 3000 VRMS (higher on request), 50 Hz, 1 min
Optoelectronics
2.5 A Output Current Optoisolated IGBT/MOSFET Gate Driver
- 2.5 A peak driver current
- 5300 V isolation voltage
- 25 kV/µs CMR
- 110 °C operating temperature
MOSFETs
Single, 600 V N-Channel Power MOSFET
- High performance E Series high-voltage Super Junction technology
- Maximum current of 47 A
- TO-247 packaging
- Maximum on-resistance of 0.064 Ω at VGS = 10 V
Power Filters
Thermistors
NTC Thermistors, High Temperature Lug Sensors, 150 °C
- 150 °C long term stability (5000 h dry heat)
- Voltage between terminals and lug 2700 VAC
- Cable test voltage 3.4 kV and customization possible
Resistors
Power Resistor for Mounting onto a Heatsink, Thick Film Technology
- Non inductive, easy mounting, low thermal radiation of the case
- LPS high power: 1100 W, wide resistance range: 1 Ω to 1.3 kΩ E24 series
- Partial Discharge (for LPS 1100 D only) ≤ 100 pC/7 kV ≤ 10 pC/5 kV
Resistors
Power Resistors Cooled by Auxiliary Heatsink (Not Supplied) Thick Film Technology
- System without external radiation
- High power / volume ratio
- Non-inductive
Resistors
Power Metal Strip® Shunt Resistor, Low TCR < ± 10 ppm/°C, Very Low Value >15 μΩ
- Duel element for redundant current sensing
- Solid metal nickel-chrome alloy resistive element with unique design for low TCR
- Customization on request
Pitch Controls
Aluminum Capacitors
Ruggedized Electrical Double Layer Energy Storage Capacitors Up to 3 V Operation
- Polarized energy storage capacitor with high capacity and energy density
- Rated voltage: 3.0 V, Useful life: up to 2000 h at 85 °C
- Ruggedized for high humidity operation, rapid charge and discharge
Film Capacitors
THB DC-Link Metallized Polypropylene Film Capacitors, Radial Type, 85 °C / 85 % RH 1000 h at UNDC
- High robustness under high humidity: THB 85 °C / 85 % RH / 1000 h at rated voltage
- High ripple current capability, low ESR, low ESL
- Widest range of cases, voltages and capacitances
Inductors
High Current Through-Hole Inductors Edge-Wound Series
- Powdered iron alloy core for stable inductance & saturation over operating temp
- High temperature continuous operation, up to 180 °C with no aging
- Isolation up to 350VDC - customization possible
Rectifiers
70 A Standard Recovery Diodes
- Up to 85 A, 1600 V diodes available in same package
- Cathode to stud and anode to stud both available
- Hermetic package
- High surge current capability
MOSFETs
Single, - 200 V P-Channel Power MOSFET
- Maximum current of - 11 A
- TO-220 packaging
- Maximum on-resistance of 0.5 Ω at VGS = 10 V
- Typical gate charge of 29.3 nC at VGS = 10 V
ICs
1500 W SMC Transzorb® TVS VWM = 5 V ∼ 188 V
- 1500 W peak pulse power capability at 10/1000 µs waveform
- Very fast response time
- Low-profile SMC package
- Excellent clamping capabilit
Optoelectronics
Dual Photovoltaic MOSFET Drive
- High open circuit output voltage (14.6 V)
- 5300 V isolation voltage
- No need for secondary side VCC
- 100 °C ambient operating temperature

